Roving Networks WIFLY GSX Manual de usuario descargar pdf (Pagina 10)

www.rovingnetworks.com Version 1.32r 10/9/2012 10

RN-WIFLY-EVAL-UM

To disconnect from a network, type leave <cr>. The red LED blinks quickly when the WiFly module is not associated with

an access point.

If you want the module to associate with a network automatically upon booting (i.e., persistent configuration), use the

set wlan command with the SSID name. For example, type:

set wlan ssid roving1

save

reboot

When the module wakes or power cycles, the module attempts to associate with the network roving1.

To associate with a secure network you must also include the network password. The WiFly module determines the

security type automatically. In this case, type:

set wlan ssid roving1

set wlan pass rubygirl

save

reboot

See Figure 8. You can confirm the security settings by typing get wlan <cr>.

Figure 8. Connect to a Secure Network

Configuration Using Ad Hoc Mode

You can configure the WiFly module over the air via an ad hoc network. Ad hoc networks are useful for point-to-point

communication. In ad hoc mode, the WiFly appears as an access point with which other Wi-Fi devices can associate. You

can turn on ad hoc mode using hardware or software configuration.

NOTE: The WiFly module only supports the OPEN mode for ad hoc networks.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 21 22

Sin comentarios

Roving Networks WIFLY GSX Manual de usuario Pagina 10