Roving Networks WIFLY GSX Manual de usuario descargar pdf (Pagina 88)

www.rovingnetworks.com Version 1.0r 9/21/2012 88

RN-WIFLYCR-UM

Command

Default

Description

set ip gateway <address>

0.0.0.0

Sets the gateway IP address.

set ip host <address>

0.0.0.0

Sets the remote host’s IP address.

set ip localport <value>

2000

Sets the local port number.

set ip netmask <address>

255.255.255.0

Sets the network mask.

set ip protocol <flag>

Sets the IP protocol.

set ip remote <value>

2000

Sets the remote host port number.

set ip tcp-mode <mask>

0x0

Controls the TCP connect timers, DNS preferences, and remote

configuration options.

set opt jointmr <value>

1000

Sets the join timer, which is the length of time (in ms) the join function

waits for the access point to complete the association process.

set opt format <flag>

0x00

Sets the HTTP client/web server information.

set opt replace <char>

$ (0x24)

Sets the replacement character you use to indicate spaces in the

SSID and pass phrases, where <char> is a single character.

set opt deviceid <string>

WiFly-GSX

Sets the configurable device ID.

set opt password <string>

“” (no password

required)

Sets the TCP connection password.

set q sensor <mask>

Specifies which sensor pins to sample when sending data using the

UDP broadcast packet or the HTTP auto sample function.

set q power <value>

Automatically turns on the sensor power.

set sys autoconn <value>

Sets the auto-connect timer in TCP mode.

set sys autosleep <value>

Sets the auto-sleep timer in UDP mode.

set sys iofunc <mask>

0x0

Sets the I/O port alternate functions.

set sys mask <mask>

0x20F0 (RN-131)

0x21F0 (RN-171)

Sets the I/O port direction.

set sys printlvl <value>

0x1

Controls the debug print messages printed by the WiFly module on

the UART.

set sys output <mask> <mask>

None

sets the output GPIO pins high or low. The optional <mask> sets a

subset of the pins.

set sys sleep <value>

Sets the sleep timer.

set sys trigger <flag> or <mask>

0x1

With this parameter setting, the module wakes from sleep state using

the sensor input 0, 1, 2, and 3.

set sys value <mask>

0x0

Sets the default value of the GPIO pins’ outputs upon power-up.

set sys wake <value>

Sets the automatic wake timer in seconds.

set time address <address>

129.6.15.28

Sets the time server address.

set time port <value>

123

Sets the time server port number.

set time enable <value>

Tells the module how often to fetch the time from the specified SNTP

time server in minutes.

set time raw <value>

None

Allows you to set the RTC raw value from the console in seconds.

set uart baud <value>

9600

Sets the UART baud rate, where <value> is 2400, 4800, 9600, 19200,

38400, 57600, 115200, 230400, 460800, or 921600.

set uart flow <value>

Sets the flow control mode and parity.

set uart instant <value>

Not applicable

Immediately changes the baud rate, where <value> is 2400, 4800,

9600, 19200, 38400, 57600, 115200, 230400, 460800, or 921600.

set uart mode <mask>

Sets the UART mode register.

set uart raw <value>

Not applicable

Sets a raw UART value.

set uart tx <value>

Not applicable

Disables or enables the UART’s TX pin (GPIO10), where <value> is 1

or 0.

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 94 95 96

Comentarios a estos manuales

Sin comentarios

Roving Networks WIFLY GSX Manual de usuario Pagina 88

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Roving Networks WIFLY GSX